I'm going to try to develop a printed circuit board on which to mount the GPS. My friend Andy, who is in ECET (Electrical and Computer Engineering Technology), says he help me out with it and get a good deal from the PCB manufacturer which makes things a lot easier. I have the sketch on paper, all that remains is translating to a PCB program and ordering the chip
I've ordered some G-motors, and they should be arriving this week. Once I get them and figure out ignition requirements, I'm going to run a test that will both verify the ignition system, and get data on the rocket motor (i.e. thrust profile)
I'll keep the update short and stop it here. Hopefully I will have more to talk about by the end of the week.